6
STEP 1:
REMOVE CHASSIS
1. Pull down front grille and remove filter.
(See Fig. 1.)
2. Lift front grille upwards and place to one side.
3. Locate and remove the four front screws. These
screws will be needed to re-install the front panel
later. (See Fig. 2.)
4. Push metal cabinet side and pull on plastic frame
to release plastic tabs on each side of front panel.
(See Fig. 3.)
5. Gently lift front panel off unit.
(See Fig. 3A.)
6. Disconnect the connector plug of the display
panel from the unit and place front panel to one
side. (See Fig. 4.)
7. Remove shipping screws from top of unit. (See
Fig. 5.)
8. Hold the cabinet while pulling on the base handle,
and carefully remove the unit.
9. Add two foam inserts to holes in top of cabinet
where shipping screws were removed from.
(See Fig. 6.)
10. Your unit may come with internal packaging
(shipping packaging, plastic ties, gray foam
padding, as shown in Fig. 7). This packaging
MUST be removed prior to installing the air
conditioner back into the cabinet.
DO NOT LIFT, PULL, OR REMOVE ANY EXPANDED
POLYSTYRENE (FOAM) FROM INSIDE OF THE AIR
CONDITIONER. IT IS NOT PACKING MATERIAL.
WINDOW MOUNTING INSTALLATION INSTRUCTIONS
FIG. 1
FIG. 4
FIG. 3
FIG. 2
FIG. 5
FIG. 6
FIG. 7
FIG. 3A
Shipping
Packaging
Shipping
Screws
Plastic Ties
Front Grille
Front Panel
Gray Foam
Padding
