4
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
- Save these instructions.
IMPORTANT
- Observe all governing codes and
ordinances.
Note to Installer
- Be sure to leave these instructions with
the Consumer.
Note to Consumer
- Keep these instructions for future
reference.
Skill level
- Installation of this appliance requires basic
mechanical skills.
Completion time
- Approximately 1 hour.
We recommend that two people install this product.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the Warranty.
You MUST use all supplied parts and use proper
installation procedures as described in these
instructions when installing this air conditioner.
CAUTION
Do not, under any circumstances, cut or remove the
third (ground) prong from the power cord.
Do not change the plug on the power cord of the air
conditioner.
Aluminum house wiring may present special problems-
consult a qualified electrician.
When handling unit, be careful to avoid cuts from sharp
metal edges and aluminum fins on front and rear coils.
REQUIRED TOOLS/HARDWARE
● Pencil
● Level
● Tape measure
● Socket wrenches
● Phillips screwdriver
● Adjustable wrench or pliers
● Large flat blade screwdriver
HARDWARE
(Included - Packed with the Unit)
7/16 inch locking
screw and flat washer
for window panels
2 ea.
3/4 (or 1/2) inch Long
Hex-head Screw
4
Safety Lock
1
3/4 inch Long Flat
Head Bolt and
Locknut
4 ea.
1/2 inch Long Screw
and Locknut
2 ea.
Sill Angle Bracket
2
Long hex-head locking
screw for tape angle,
side retailer 5/16 inch
long
10
Foam insert
2
Window sash seal
foam
1
Insulation Panels
2
Weather stripping (10″
x 3/4″ x 1/12″)
5
INSTALLATION INSTRUCTIONS
