6
AIR CONDITIONER FEATURES(CONTINUED)
TO TURN UNIT ON:
NOTE:
The following instructions represent the Unit Controls, the same instructions can be used
for the Remote Control.
TO CHANGE TEMPERATURE
SETTING:
Press the On/Off button.
DO THIS:
Press to raise
DO THIS:
Press to lower
Press or hold either Up( ) or Down ( ) button
until the desired temperature is seen on the
display. This temperature will be automatically
maintained anywhere between 62 F(17 C) and
86 F(30 C). If you want the display to read
the actual room temperature, see To Operate
on Fan Only section on page 7.
NOTE:
TO ADJUST FAN SPEEDS:
Press to select
appropriate fan
speed
DO THIS:
NOTE:
Sleep
Check
Filter
Auto
On/off
Fan
High
Med
Low
on
off
Timer
TEMP/TIMER
TEMP/TIMER
Energy
Saver
on
off
Timer
Auto
Fan
Cool
Dry
Mode
TEMP/TIMER
TEMP/TIMER
Sleep
Check
Filter
Auto
On/off
Fan
High
Med
Low
on
off
Timer
TEMP/TIMER
TEMP/TIMER
There are Four(4) fan speeds,Auto, Low, Med or
High. Each time the button is pressed, the fan
speed mode is shifted. For some models, the fan
speed cannot be adjusted under HEAT mode.
On Dry mode,the fan speed is controlled at Low
automatically.
