background image

CARE AND CLEANING

Clean your air conditioner occasionally to keep it looking new. 

Be sure to unplug the unit 

before cleaning to prevent shock or fire hazards.

Air Filter Cleaning

The air filter should be cleaned every two weeks
or as necessary. Trapped particles in the filter can 
build up and cause an accumulation of frost on the 
cooling coils.
     Grasp the filter by the center and pull up and 
     out.
     Wash the filter using liquid dishwashing deter-
     gent and warm water. Rinse filter thoroughly. 
     Gently shake excess water from the filter. Be
     sure the filter is thoroughly dry before replacing.
     Or, instead of washing you may vacuum the 
      filter clean.

Note: 

Never use hot water over 104

(40

) to

   cl ean th e ai r fil ter. Never attempt to operate the  

unit without the air filter.

 

Cabinet Cleaning

     Be sure to unplug the air conditioner to prevent
     shock or fire hazard. The cabinet and front may
     be dusted with an oil-free cloth or washed with
     a cloth dampened in a solution of warm water
     and mild liquid dishwashing detergent. Rinse
     thoroughly and wipe dry.
     Never use harsh cleaners, wax or polish on the 
     cabinet front.
     Be sure to wring excess water from the cloth before
     wiping around the controls. Excess water in or around
     the controls may cause damage to the air conditioner.
     Plug in air conditioner after unit has dried out completely.

      If you plan to store the air conditioner during the winter,
      remove it carefully from the window according to the 
      installation instructions. Cover it with plastic or return it
      to the original carton. Always keep unit in the upright position. 
     

Winter Storage

23

CAUTION

Содержание 12.000 BTU




























Отзывы: