Installation and Operation Manual for
Perenio®
Joule Eco Smart Heater
©Perenio IoT spol s r.o. All rights reserved
Document version: 1.1.0
Page
23
of
55
5.
Lean the Eco Smart Heater carefully against the wall and hang it to all 4 screws
at the same time. Make sure that all screws were engaged successfully, and that
the device is properly secured.
6.
Adjust the tightening depth of the screws into dowels, if required.
NOTE
that during installation, you should make sure that the screws are
tightened securely, and that the control unit is oriented correctly in relation to the
electrical socket.
2.2 Initial Switching On
To switch on the Eco Smart Heater, plug it into an mains socket using the power cord.
NOTE
that by default, the Eco Smart Heater will be in the mode ready for
activation in the mobile app for 3 minutes after it is first switched on. After that,
the device will ve automatically switched to the standby mode (Heating mode will
be off).
Next, you should select the way to manage the device, namely:
1.
Manual operation.
2.
Remote control via the mobile app.
3.
Remote control via voice assistants.
2.3 Manual Operation
The Eco Smart Heater may be manually controlled via the power button located on the
control unit of the device.
1.
To start the heating process, press and hold the power button for less than
3 seconds.
2.
To stop the heating process, press and hold the power button again for less than
3 seconds, and the device will be switched to the standby mode (See Table 1
for more details on functions of the power button).
NOTE
that you should unplug the power cable from the electrical socket to
completely de-energize the Eco Smart Heater.
Содержание Joule Eco Smart Heater
Страница 2: ......