Perenio Joule Eco Smart Heater Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 55

Perenio Joule Eco Smart Heater Скачать руководство пользователя страница 19

Installation and Operation Manual for

Perenio®

Joule Eco Smart Heater

©Perenio IoT spol s r.o. All rights reserved

Document version: 1.1.0

Page

19

of

55

2 Installation and Setup

Before installation, the User shall select one of the following possible locations and
mounting modes for the device:

•

On a flat and stable horizontal surface on legs;

•

On a flat and non-sloping vertical surface on brackets.

The User shall also make sure that the selected location meets the following
requirements:

•

Availability of the source of power at the installation area of the Eco Smart
Heater;

•

Correct location of the electrical socket (See

“

Limitations and Warnings

” Section

for details).

WARNING!

It is strongly recommended that the Eco Smart Heater is installed

out of the reach of children and pets, as contact with the device in operation may
result in burns. Do not use the Eco Smart Heater on carpets or near curtains or
upholstered furniture.

NOTE

that it is not recommended to install the device in areas with a high level

of noise and a high-frequency interference. Reinforced concrete floors may reduce
the distance of wireless signal transmission.

See below possible installation locations for the Eco Smart Heater.

Figure 4

–

Examples of installation*

*

Images of are provided for informational purposes only

«
...
17
18
19
20
21
...
»

Содержание Joule Eco Smart Heater
























































Отзывы:

Нет отзывов