PERCo TTD-08A, Руководство по сборке и эксплуатации

Страница: 20 / 38

TTD-08A Electromechanical Box Tripod Turnstile
19
6 MARKING AND PACKAGING
The turnstile has a marking sticker on the internal side of the turnstile top cover and a label
– inside, on the rear side of the turnstile housing. The label contains trademark, contact
information of the manufacturer, production date, power-supply voltage, power
consumption. To get access to the marking sticker and the label, open the top cover.
To do so proceed as follows:
1. Switch off power supply of the turnstile.
2. Insert the allen key into the hole in the rear part of the turnstile housing, use it to
unscrew the drag screw (4), unlocking the top cover;
3. Holding the front edge of the top cover (3) carefully lift it and turning it remove it
from the turnstile housing. Be careful not to damage the CLB located under the
cover while removing the top cover.
4. Place the top cover on a flat steady surface.
Installation of the top cover back into its operation position is carried out in reverse order.
After mounting the top cover, return the drag screw into initial position. Turn on the
turnstile power supply.
The turnstile in the original package should be transported in closed freight containers or
other closed type cargo transport units.
Box dimensions (length × width × height) ................................................... 132×110×40 cm
Box weight (gross) .............................................................................................. max. 95
kg