PERCo TTD-08A, Руководство по сборке и эксплуатации

Страница: 11 / 38

Assembly & Operation Manual
10
Table 1 – Contacts of the connector blocks
№
Item Function of the contact
Connector blocks of the CLB.140
XT1L (In)
1 +12V Output of power supply for ID
2 Detector Input for connections ID
3
GND Common contact for connections ID
4 Fire Alarm
Input for emergency opening device
5 GND
6 GND Common
7 Unlock A
Inputs for turnstile control 8 Stop
9 Unlock B
10 Led A
Indication outputs of RC panel 11 Led Stop
12
Led B
XT1H (Out)
1 GND
Output of power supply for additional devices
2 +12V
3 Alarm 1
Outputs for connections siren
4 Alarm 2
5 Common Common contact for PASS A , PASS B signals
6 Pass A PASS A relay contact (passage in direction A)
7 Pass B PASS A relay contact (passage in direction B)
9 Ready Relay output READY (turnstile readiness)
10 Det Out Relay output DET OUT (retransmission of intrusion detector condition)
XT3 (+12VDC)
1 +12V
Connection of external power supply
2 GND
XT4 (Light A)
1 NO
Light A relay contacts – connection of remote indicator for direction A 2 C
3 NC
XT5 (Light B)
5 NO
Light B relay contacts – connection of remote indicator for direction B 6 C
7 NC
Out connector block XS1 on the bracket
1 +12V
Connection of external power supply
2 GND
3 Fire Alarm
Input for emergency opening device
4 GND
5 GND Common
6 Unlock A
Inputs for turnstile control 7 Stop
8 Unlock B
9
Led A
Indication outputs of RC panel 10 Led Stop
11
Led B
12 Common Common contact for PASS A , PASS B signals
13 Pass A PASS A relay contact (passage in direction A)
14 Pass B PASS A relay contact (passage in direction B)