Assembly and Operation Manual
The equipment can operate as an operating device as a part of ACS or as a standalone unit
operated from the RC-panel.
The speed gate provides the possibility of proximity card readers installation inside the posts
under the glass section top cover.
The glass section top cover (
STC-01G
,
SDC-01G
,
STC-01GS
,
SDC-01GS
) is equipped with
indication block (blocks), which features passage granting indicator and proximity card
presentation zone indicator.
The speed gate features the swing panel position adjustment in the initial (locked) position
(training mode).
Indication blocks of the passage grant / denial are located in the user line-of-sight range on the
speed gate central section allowing complete the passage as fast as users can walk through
the turnstile.
The equipment provides the possibility of external indication block connection to duplicate
passage grant / denial indication.
Acoustic alarm (siren) connection is provided to warn the operator about unauthorized access
attempt.
Automatic emergency opening of the passage is provided upon receipt of an “
Alarm
” signal.
The “
Alarm
” signal can be sent by the emergency system device or by the operator using the
emergency button (hereinafter – emergency passage opening device).
The components are made of polished stainless steel. The swing panels and the filling glass
are made of tempered glass of 8 -10 mm thick.
5.2 Design
The speed gate design is shown in Fig. 6; the double-sided section design is shown in Fig. 7. The
numbers of the equipment parts are stated in the Manual in accordance with Fig. 5 and 6.
The speed gate consists of two sections,
Master
and
Slave,
and an RC-panel. Each section is
equipped with a motorized swing panel (1).
Slave
section is connected to
Master
section with two
connection cables (19, 20).
Use double-sided sections to arrange more passage lane. The double-sided section is completed
with an RC-panel and equipped with two swing panels (1): on the
Master
side and on the
Slave
side. Each swing panel has its motor drive.
Slave
side is connected to the speed gate
Master
section or to the
Master
side of another double-sided section with two connection cables (19, 20).
The speed gate
Slave
section (
Slave
side of the next double-sided section) is connected to
Master
side with two connection cables (21, 22) from the standard delivery set.
5.2.1 Section
Each section consists of three posts: one central (2) and two side (7) posts. The posts are
interconnected by a top duct (12) and two bottom ducts (15). Each section features a section top
cover (10), which covers a top duct. The bottom ducts are covered with bottom duct top covers
(14).
The spacing between posts is completed with filling glass (13), which prevents unauthorized entry
into the passageway. Bolts, which fasten the filling glasses to the central post, are covered with
central post rear panel (6). Bolts, which fasten the filling glasses to the side posts, are covered with
the front panels (8).
The section top cover is equipped with an indication block (blocks) (11), which features a passage
granting indicator (green arrow) and a card presentation zone indicator (“a hand with a card”
pictogram).
The side posts are equipped with the front-end indication blocks (9) indicating the passage
direction or passage denial (white arrow or red cross).
The central post (2) features an indication block (3) with square color indicators of passage grant /
denial.
The swing panel (1) is fixed to the central post rotating support. The rotating support is covered
with the central post cover plate (5). The rotating support is driven by motor, located under the
swing panel cover plate (4).
12
