Peraqua 7301269, Руководство пользователя

Страница: 38 / 56

For users
- 8 -
2.2.1 Power On: Press for 3 seconds to light up screen, then press to power on heat pump.
2.2.2 Adjust Set Temperature: When screen is unlocked, press or to display or adjust the set
temperature.
2.2.3 Mode Selection: Press to select mode.
a. Auto : adjustable temperature range 12~40 ℃
b. Heating : adjustable temperature range 18~40 ℃
c. Cooling : adjustable temperature range 12~30 ℃
2.2.4 Turbo/Smart/Silence mode selection:
a. Smart mode as default will be activated when heat pump is on, and screen shows .
b. Press to enter Turbo mode, and screen shows
，
then press to enter Silence mode, the
screen shows . Prees again, the screen shows and return to Smart mode.
Attention:
a.
When use the Turbo mode, you should select it every time, the machine will not automatically enter the
Turbo mode.
b. During the Turbo mode, when the machine reaches the set temperature, it will automatically return to the
smart mode.
2.2.5 Defrosting
a. Auto Defrosting: When heat pump is defrosting, will be flashing. After defrosting, will stop
flashing.
b. Compulsory Defrosting: When heat pump is heating, press and together for 5 seconds to start
compulsory defrosting, and will be flashing. After defrosting, will stop flashing.
(Note: Compulsory defrosting intervals should be more than 30 minutes and the compressor should run for
more than 10 minutes.)
2.2.6 Temperature display conversion between ℃ and ℉:
Press " " and " " together for 5 seconds to switch between ℃ and ℉ .
2.2.7 Wifi setting
Please kindly check the last page.