Peqlab Thriller, Инструкция по эксплуатации

Страница: 9 / 20

Instruction Manual Thriller
®
PEQLAB_v0314_E 7
CLEANING, MAINTENANCE AND REPAIR
Please make sure to disconnect the instrument from the main power if cleaning is desired.
We recommend the use of a mild soap solution to clean the housing. If sample liquid has
run into the boreholes of the blocks, they should be cleaned with a mild soap solution
immediately and rinsed with distilled water. Mild alcohol-containing disinfectants may be
used for decontamination. Maintenance of the Thriller
®
is not required.
In case a repair gets necessary the device must be sent to the manufacturer. The surface
of the device should be decontaminated with a lint free cloth soaked with 70 % ethanol
before sending.
The drill holes of the thermoblock shall be cleaned with a 1.5 %
hypochlorite solution with the help of a cotton bud. Please fill in and sign the
decontamination certificate and send it to the manufacturer together with the device.
TECHNICAL DATA
Temperature control range: 4 °C (at 20 °C RT) to 99 °C in 1 °C steps
Temperature accuracy:

0.5 °C
Heating rate:
approx. 5 °C/min
Cooling rate: 4 °C/min 99 °C to 20 °C
1 °C/min 20 °C to 4 °C
The heating and cooling rates may differ when using fluid-filled reaction tubes or at
higher ambient temperature.
Mix intensity in steps of 50 rpm:
0.5 ml thermoblock
300 to 1500 rpm
1.5 and 2.0 ml thermoblock 300 to 1400 rpm
0.2 ml thermoblock 300 to 1400 rpm
Microplate thermoblock 300 to 1400 rpm
Mixing stroke:
3 mm
Programs: 1 direct operation program (P0)
9 programs with 9 steps each (P1 – P9)
Max. total time:
99 h 59 m or infinite
Max. mixing activity/pause
(interval function):
99 m 59 s
Thermoblocks:
24 x 1.5 ml block
24 x 0.5 ml block
24 x 2.0 ml block
96 x 0.2 ml block
Microplate block