Peqlab Thriller, Инструкция по эксплуатации

Страница: 8 / 20

Instruction Manual Thriller
®
PEQLAB_v0314_E 6
Mixing without incubating facility
Set the temperature to OFF. The Thriller
®
will cool down or heat up until the block has
reached 25 °C. Subsequently the block will adopt the ambient temperature.
Set the total time and the mixing intensity and start the program. A signal is sounded as
soon as the time has run down.
Mixing at intervals
Set the setpoint temperature or set the temperature to OFF. Set the total time and the
mixing intensity. Set the requested mixing activity (e.g. 0:10m = 10 seconds).
Subsequently set the time of the mixing break (e.g. 0:05m = 5 seconds). Start the
program. The Thriller
®
will start operating at a change of mixing activity (0:10m) and
mixing break (0:05m) in succession. After the total time has run down, the program will
stop.
Short mix
The Thriller
®
mixes at the intensity shown in the display as long as the button is pressed.
Storing parameters
Changes in the programs P1 to P9 are saved by pressing the Save button. If a program is
quit without saving, the query will appear whether the changes shall be saved ('save
changes?'). The changes are saved by pressing the + button, whereas pressing the –
button will cause the program to quit without saving.
Changes in the direct operation program P0 will be saved automatically.