Peqlab Thriller, Инструкция по эксплуатации

Страница: 6 / 20

Instruction Manual Thriller
®
PEQLAB_v0314_E 4
OPERATING THE THRILLER
®
Switch on the Thriller
®
at the rear side of the instrument, the display will show the values
of the direct operation program P0 set last.
Set. temp./Act. temp. Total time Mixing intensity
Mixing activity Mixing break Prog No./Prog step
60/22 01h00m 450 rpm
00:10m 00:05m P0
Figure 2: Display of the Thriller
®
Direct operation program P0

After the instrument has been switched on the cursor will start flashing at the setpoint
temperature.

Use the + or – button to set the requested temperature. The Thriller
®
will start the
heating or cooling process automatically.

Use the

key to skip to the total time. Use the + or – button to set the total time. The
Thriller
®
could be programmed “infinite”, when total time is set to the maximum. The
maximum set point is 99h 59min, after this you can choose “inf” for infinite.

Use the

key to skip to the mixing intensity. Use the + or – button to set the mixing
intensity.

Use the

key to skip to the mixing time. Use the interval function to enter a
continuous change of mixing activity and mixing break. If no interval is required, set
these parameters to OFF. If an interval function is required, use the + or – button to set
the time of the mixing activity. Use the

button to skip to the mixing break, and then
use the + or – button to set the time of the break. If the mixing time has been set to
OFF, the mixing intensity set is used for continuous mixing.