Instruction Manual Thriller
®
PEQLAB_v0314_E 2
WARRANTY
PEQLAB guarantees that the system you have received has been thoroughly tested and
meets its published specification.
However, immediately upon arrival, please check carefully that the shipment is complete
and has not been damaged in transit. For missing parts or to report any kind of damage,
please contact PEQLAB (see 'TECHNICAL SUPPORT AND ORDERING INFORMATION').
Please retain all packaging materials until the delivery has been completely checked since
this will speed up the return of goods if required and reduce environmental impact. Any
form of returns, replacements or credit notes must be agreed in advance by PEQLAB.
For the Thriller
®
Thermoshaker Incubator and the thermoblocks PEQLAB guarantees a
warranty period of 24 months if the products have been used solely according to the
instruction manual and if not agreed differently. No liability is accepted for loss or
damage arising from incorrect use. PEQLAB's liability is limited to the repair or
replacement of the unit or refund of the purchase price, at PEQLAB's discretion. PEQLAB
is not liable for any consequential damages.
PEQLAB reserves the right to alter the technical specifications without prior notice. This
will enable us to implement developments as soon as they arise.
PACKAGING LIST
Thriller
®
Thermoshaker Incubator without block
1 main power cable
1 hex driver
1 instruction manual
INSTALLATION
The Thriller
®
should be placed on a firm support plate. Sufficient ventilation must be
ensured for perfect functional operation of the Thriller
®
. For this reason, the Thriller
®
should always have a few centimeters of space between the unit and neighboring
instruments or the wall.
Remove the packaging and place the Thriller
®
on a firm support plate. Remove the
packaging of the block. The block can be fitted to the Thriller
®
in one direction only. The
orientation is defined by the measuring probe stylus.
Place the block on the Thriller
®
in the correct orientation and use the hex driver enclosed
to tighten the hexagon head cap screws.
Use the main cable supplied to connect the Thriller
®
to the main supply. The connector
and the main switch are located on the rear side of the Thriller
®
.
Содержание Thriller
Страница 2: ......
