Peqlab PerfectSpin 24 R, Руководство по обслуживанию

Страница: 4 / 54

PerfectSpin 24 R Service Manual
1. Safety Precautions
Before servicing the PerfectSpin 24 R refrigerated microcentrifuge for the first time,
please read
this entire service manual carefully. It’s also important to refer the operation manual about
how to operate the unit correctly. For your safety, please observe the following points:
1.1 Operation Safety Precautions
1. When using infectious, radioactive or toxic solutions which may pose health risks,
please observe the appropriate safety precautions.
2. Do not use this machine in a potentially explosive environment or with potentially
explosive chemicals.
3. Install the machine in location free of excessive dust.
4. Avoid placing the machine in direct sunlight.
5. Choose a flat, stable surface capable of withstanding the weight of the machine.
6. Install the machine in the room temperature 15~30°C, relative humidity 20~80%.
7. Do not install the machine in a location that blocks the air vents.
8. Make sure the power source conforms to the required power supply
specifications.
9. To avoid electric shock, make sure the machine is plugged into a grounded electric
outlet.
10. Do not allow water or any foreign objects to enter the various openings of the
machine.
11. Switch off the power switch before cleaning or performing any service on the
machine, such as replacing the fuses.
12. The rotor and the rotor lid must always be installed securely on the motor shaft.
13. Always load the rotor symmetrically. Each tube should be counterbalanced by
another tube of the same type and weight.
14. To ensure sufficient ventilation, install the centrifuge with at least 30 cm of free
space on all sides, including the rear.
15. Repair should be carried out by Labnet International authorized service personnel
only.
16. Only use spare parts and accessories provided by Labnet Int. or an authorized Labnet
distributor.
Warning Label: Please be aware of the danger of electric shock.
1