Appendix
2
0
1
7
-1
2
15
5
Appendix
5.1
Cable Routing in the RS-485 Bus
The data cable must always form an in-line connection between the first and the last node. This
in-line connection must end with a terminator.
The RS-485 terminators are integrated in the WCS readers and can be switched on and off
with the interface module.
If only
one WCS reader
is connected, one device is connected at the beginning and one
device is connected at the end of the data line.
Figure 5.1
Connection of
one
reading head
Reading head
Interface or control
(PLC)
