Pepperl+Fuchs VisuNet DPU2100 Series, Руководство пользователя

Страница: 20 / 23

2
018-
11
20
VisuNet Display Unit
Operation and Configuration
Apply/Revert Changes in VisuNet RM Shell 5
If you changed settings, the "Apply Changes" button turns green to indicate changes to the
current settings.
1. To save the changes, click .
The changes have been saved.
2. If you want to discard the changes, click .
The changes have been discarded. The settings have been set back to the last saved
version.
In the enabled keypad lock mechanism, none of the front buttons operates individually, but the
front buttons continue to show the same state as unlocked. The attempt to press a key causes
all LEDs to flash three times. Once home is the only button that lights up, the unlock sequence
can be started.
Unlocking the Front Buttons via VisuNet RM Shell 5
When the keypad lock mechanism is enabled, the front buttons must be unlocked before the
button functions can be used. To unlock the front buttons, an unlock sequence from left to right
on the keypad is required:
1. Press the "home" button when it is illuminated .
2. Press the "decrease brightness" button when it is illuminated .
3. Press the "increased brightness" button when it is illuminated .
4. Press the "touch enable/disable" button when it is illuminated .
5. Press the "power" button when it is illuminated .
If the unlock sequence is performed incorrectly, the process must be started again from the
beginning.
An unsuccessful unlocking sequence is indicated by an animation: all buttons flash twice,
followed by the animation that shows the unlock sequence via the front button LEDs.
If the keypad lock mechanism is activated and any button is pressed except the home button,
the unlock animation is shown.
After the set idle time, the front buttons will be locked again automatically. To signal this, all
LEDs flash three times. To lock the front buttons before the idle time has passed, press and
hold the "touch enable/disable" button until all LEDs are flashing three times.
The locking feature can also be set on startup, or only single buttons can be disabled as
requested. For more information, refer to the latest version of the VisuNet RM Shell 5 manual
on www.pepperl-fuchs.com.