Operation and Configuration
2
018-
11
19
Locking and Unlocking Front Buttons
The capacitive front buttons are sensitive to water and moisture. To avoid "false positive" button
triggers in challenging environments, the front buttons can be protected with a lock mechanism
in Service Controller firmware versions 1.3.2.198 and higher.
When the lock mechanism is activated, the operator must first unlock the front buttons via an
unlock pattern.
The lock mechanism can only be enabled via VisuNet RM Shell 5 firmware. This feature is
available in RM Shell 5 versions with an update of 5.0.1.441 or higher.
Locking the Front Buttons via VisuNet RM Shell 5
The default setting of the button lock mechanism is "off."
1. From the main screen of RM Shell 5, change "Operator" to "Administrator."
2. Enter the system settings app by clicking the appropriate icon on the home screen.
3. Navigate to "frontkey settings" on the navigation bar.
4. Enable the keypad lock mechanism.
5. Set the idle time before the automatic locking of the keypad (in seconds) by using the slider
to adjust between 1 and 120 seconds.
