2
018-
11
12
Installation
3.3
Mechanical Installation
Mounting the PCU/TCU onto the DPU
1. Ensure the correct position of the PCU/TCU.
2. Place the PCU/TCU with the Fuchs connector above the Fuchs socket on
the back of the display unit.
3.
Carefully push the Fuchs connector into the Fuchs socket.
4.
Use the mounting screws to attach the PCU/TCU onto the display unit
. T
ighten
the screws
in a criss-cross pattern to a
torque
of
2
Nm).
Figure 3.1
Mounting the TCU/PCU onto the display unit
Note!
For system installation instructions and complete mounting options, see the VisuNet IXD
System Manual. Installation to IEC 60079-14 and other local and national requirements are to
be followed as needed.
