Pepperl+Fuchs VIM3 IO Series, Руководство пользователя

Страница: 12 / 22

VIM3*-IO-* Vibration Sensors
Installation
2
0
2
2
-1
1
11
3 Installation
3.1 Instructions for Mechanical and Electrical Installation
Always observe the following instructions to ensure safe operation of the vibration sensor:
Note
Further installation-relevant information on technical data, mechanical data, and available
connection lines for the relevant vibration sensor types can be found in the corresponding
datasheet.
Warning!
Work must be performed by trained and qualified personnel only!
Commissioning and operation of this electrical device must be performed by trained and quali-
fied personnel only. This means individuals who are qualified to commission (in accordance
with safety engineering), connect to ground, and label devices, systems, and circuits.
Warning!
Perform work only when the device is de-energized!
De-energize your device before performing work on the electrical connections. Short circuits,
voltage peaks, and similar events can lead to faults and undefined statuses. This presents a
significant risk of personal injury and property damage.
Warning!
Protect cables against interference and damage!
Protect the connection cable and any extension cables from electrical interference and
mechanical damage. Always observe the local regulations and instructions.
Warning!
Check electrical connections before switching on the plant!
Check all electrical connections before switching on the plant. Incorrect connections present a
significant risk of personal injury and property damage. Incorrect connections can lead to mal-
functions.
Caution!
Do not perform any electrical modifications!
It is not permitted to perform electrical modifications on the vibration sensor. If you open or
modify the device yourself, you are endangering yourself and others, voiding any warranty, and
absolving the manufacturer of any liability.
Caution!
Ensure that the data cable and power supply cable are physically separated!
To prevent interference, route the cordset for the vibration sensor so that it is a suitable distance
away from power supply cables. Shielded cables must be used to ensure reliable data transfer.
A perfect ground connection must be ensured. Always observe the local regulations and
instructions.