Installation
2
0
1
7
-0
4
15
3
Installation
3.1
Mounting
Figure 3.1
Mounting the Housing
There are 3 different ways of installing the housing of the SmartRunner in your plant.
■
One-sided lateral mounting with M4 screws: You can mount the housing on its right-hand
or left-hand side using the 2x M4 threaded sleeves. The maximum screw-in depth of the
M4 screws is 8 mm.
■
Continuous lateral mounting with M3 screws: M4 threaded sleeves are designed in such a
manner so that M3 screws pass all the way through the housing. Use 2x sufficiently long
M3 screws with 2x lock nuts to mount the device in the plant.
■
Mounting the underside of the device with M4 screws: You can use the 2x threaded
sleeves to mount the underside of the housing. The maximum screw-in depth of the M4
screws is 5 mm.
38
12
M4
55
8
5
9
9
.1
3
2
4
8
5
8
1
5
.3
5
M4
20
A
A
14
Caution!
Damage to Equipment
The threads in the bores at the side and on the underside of the housing are not thru-holes.
Observe the maximum permissible screw-in depth to avoid damaging the device or mounting
incorrectly. Do not overtighten the screws. The maximum torque of the mounting screws must
not exceed 2 Nm.
