2
0
1
7
-0
4
12
Product Specifications
Description of the Function Buttons
In presentation mode, the following applies:
■
Button 1: triggers an evaluation.
■
Button 2: when pressed and held for up to 2 seconds, activates the teach-in process.
When pressed and held for longer than 2 seconds, activates code card mode.
In normal mode, the following applies:
■
Button 1: no function
■
Button 2: when pressed and held for longer than 2 seconds, activates code card mode
Description of LEDs
Note!
The function buttons are only activated during a parameterizable time span after the sensor is
switched on, following which they are locked. The default value for this time span is 5 minutes.
The function buttons have different functions depending on the selected operating state.
Ready: (green/red)
■
Lights up red if there is a sensor fault.
■
Lights up green if the sensor is ready for operation.
■
Flashes green if the sensor is in configuration mode.
■
Flashes green rapidly if the sensor is in code card mode.
Teach-in: (yellow)
■
Lights up yellow during the teach-in process.
Result: (green/red)
■
Lights up red when an object has been detected and/or the background line has
been interrupted.
■
Lights up green when the background line is not interrupted; no object has been
detected.
When the sensor is in code card mode:
■
Lights up green when a correct code has been read.
■
Lights up red when an incorrect code has been read.
■
Off if no code has been read.
Trigger: (yellow)
■
Lights up yellow if the hardware trigger signal is activated.
Diagnosis: (red)
■
Lights up red if a bus error has occurred.
■
Lights up red if a system error has occurred on the interface controller.
■
Flashes red if the sensor is in update mode.
2
1
5
6
7
8
4
3
1
2
3
4
5
