53
Radar Motion Sensor RMS-FRW
Appendix
Standard profile door control
Following the selection of the control system, the pre-defined settings (ex. polarity outputs, test input, etc.) will be
automatically transferred to the sensor.
Please contact us directly, or consult the Internet page www.pepperl-fuchs.com for a list of the pre-defined door con-
trol systems with a listing of all settings.
This setting can only be made with the remote control.
Sensor status
The current sensor status can be read by means of this function.
Reset
Using this function, all device parameters are restored to the factory default settings, and then the sensor begins
initialization.
This setting can be set using the remote control or the keypad menu.
Code
Access to the sensor can either be set with code, without code or locked completely.
This setting can only be made with the remote control.
Disconnection
This parameter can be used to immediately disconnect the connection between remote control and sensor.
This setting can only be made with the remote control.
