Pepperl+Fuchs PSCAN-D-1D-D2 Скачать руководство пользователя страница 3

Страница: 3 / 85

General information

PSCAN-D-1D-D2 Division 2 Barcode Reader

Subject to modifications

www.pepperl-fuchs.us

USA: +1 330 486 0002

Singapore: +65 6779 9091

Germany: +49 621 776 2222

The publisher reserves the right to alter the information and data

contained in this manual without prior notice. Unless otherwise

indicated, the company names as well as other names and data used

in the examples are purely fictitious. The publisher may have registered

patents or pending patent applications for subject matter covered in the

manual. This manual does not give you license to these patents.

LIMITED WARRANTY:

NO WARRANTY IS PROVIDED FOR THE ACCURACY OF THE INFORMATION

CONTAINED IN THIS MANUAL. AS MISTAKES CANNOT BE ENTIRELY AVOIDED

DESPITE TAKING THE GREATEST OF CARE, WE WOULD BE GRATEFUL TO

RECEIVE INFORMATION ABOUT ANY ERRORS YOU MAY DISCOVER. THE

PUBLISHER DISCLAIMS ALL LEGAL RESPONSIBILITY OR LIABILITY FOR

ERRORS AS WELL AS FOR SUBSEQUENT DAMAGES AND CLAIMS.

MANUFACTURER:

PEPPERL-FUCHS, INC.

1600 ENTERPRISE PKWY

TWINSBURG, OH 44087USA

www.pepperl-fuchs.us

Tel. 330-486-0002

Fax 330-963-5827

E-Mail: [email protected]

Safety

General safety instructions

•

The plant owner is responsible for its planning, installation,

commissioning, operation, maintenance, and disassembly.

•

Installation and commissioning of all devices must be performed by

a trained professional only.

•

Protection of operating personnel and the system is not ensured if

the product is not used in accordance with its intended purpose.

•

Laws and regulations applicable to the usage or the intended

purpose must be observed.

•

The devices are only approved for appropriate and intended use.

Ignoring these instructions will void any warranty and absolve the

manufacturer from any liability.

•

The Declaration of Conformity, Certificate of Compliance, Statement

of Conformity, EC type-examination certificate and data sheets are

an integral part of this document.

•

The data sheet contains the electrical data of the Declaration

of Conformity, the Certificate of Compliance, and the EC-type-

examination certificate.

•

The documents mentioned are available from

http://www.pepperl-fuchs.com or your local Fuchs

representative.

Delivery, transport, and storage

•

Check the packaging and contents for damage.

•

Check if you have received every item and if the items received are

the ones you ordered.

•

Keep the original packaging. Always store and transport the device

in the original packaging.

•

Always store the device in a clean and dry environment. The

permitted storage temperature (see datasheet) must be considered.

PSCAN-D-1* intended use

The PSCAN-D-1D-D2 EX barcode reader can be used in Class I/Div. 2,

Class II/Div. 2, and Class III/Div.2 hazardous areas. The barcode reader

is able to read all standard 1-D code families. An audible beep will be

heard once a successful scan is completed. Bidirectional communication

between barcode reader and host is also possible.

Supply and communication of the barcode reader is made by a

nonincendive barrier that is required for Div. 2 installation. The devices

are only approved for appropriate and intended use. Ignoring these

instructions will void any warranty and absolve the manufacturer from

any liability.

Installation and commissioning

The installation instructions in accordance with IEC/EN 60079-14 must

be observed. If devices have already been operated in general electrical

systems, they may no longer be installed in electrical systems used in

combination with hazardous areas. The respective peak values of the

field device and the associated apparatus with regard to explosion

protection should be considered when connecting nonincendive field

devices.

Technical data

Hazardous location label

Data for Use in Conjunction with Hazardous Areas

Voltage (U)

10 VDC

Current (I)

500 mA

Capacitance (C)

250 µF

Inductance (L)

75 µH

Operating Temperature

Ambient temperature

C to 50

C (14

ºF

to 122

Содержание PSCAN-D-1D-D2






















































































Результаты поиска

Содержание PSCAN-D-1D-D2

Отзывы:

Похожие инструкции для PSCAN-D-1D-D2

Бренды по названию

Популярные бренды

Pepperl+Fuchs PSCAN-D-1D-D2, Инструкция по установке и эксплуатации

Результаты поиска

Содержание PSCAN-D-1D-D2

Отзывы:

Похожие инструкции для PSCAN-D-1D-D2

Бренды по названию

Популярные бренды