81
39
68
20
13
-10
12 - EN
Universal Temperature Converter KCD2-UT2-(Ex)1
Configuration tools
EN
6.2 Communication driver
In a
PACT
ware
TM
project, communication with a UT2 is only possible via the communication driver
P2P RS232 FDT
. If your project does not yet contain such a driver, please add it to the project
from the device catalogue (see "
PACT
ware
TM
process automation configuration tool" manual).
The parameters of the communication DTM is the used PC interface and the number of retries.
The parameter is set as follows:
• Double-click the
P2P RS232 FDT
driver with the mouse
• Select the
Communication Port
•
Communication Retries
: number of retries the COM DTM attempts to establish communication
to the connected device.
To add a UT2 to a project, select a
P2P RS232 FDT
driver of the project. Then add the UT2 from
the device catalogue.
Further information on the individual steps can be found in the "
PACT
ware
TM
process automation
configuration tool" manual.
The description in the following chapter assumes that a UT2 has been selected in the project.
