2
0
1
7
-0
7
9
IO-Link RFID Reader, HF
4.2
Connection
Pin 2 is not used.
The read/write head is connected via a point-to-point connection to the IO-Link master.
According to the IO-Link standard, the connection line may be up to 20 meters long.
4.3
Accessories
You can connect the IQT1-*-IO-V1 read/write heads to any IO-Link master. The following IO-
Link masters are available from Fuchs:
IO-Link-Master02-USB
IO-Link master for connection to higher-level devices via USB
ICE1-8IOL-G60L-V1D
Ethernet IO-Link module with eight inputs/outputs for connection to
a higher-level system via Ethernet IP, Profinet, or EtherCat.
You can use any HF read/write tag that complies with ISO 15693.
An unshielded three- or four-wire cable with an M12 plug and a maximum length of 20 m can
be used to connect the read/write head to the IO-Link master.
You can find suitable accessories on our website
http://www.pepperl-fuchs.com
Important note!
In the product search, simply enter the type designation for your read/write head. The product
page contains a list of related products.
