2
0
1
7
-0
7
10
IO-Link RFID Reader, HF
5
Installation
5.1
Storage and Transportation
Package the device for storage and transportation such that it is protected from impact and
moisture. The original packaging provides optimum protection. Please also observe the
permitted ambient conditions found in the technical datasheet.
5.2
Unpacking
Check the product for damage while unpacking. In the event of damage to the product, inform
the post office or parcel service and notify the supplier.
Retain the original packaging in case you have to store or ship the device again at a later
point.
Should you have any questions, please contact Fuchs.
5.3
Mounting and Connecting the Read/Write Head
Important note!
The read/write head is intended for mounting indoors. Do not mount the read/write head on
metal surfaces. Maintain
a minimum distance of 50 mm
between the device and any
metals.
If you want to mount multiple devices side by side, keep a
minimum distance of 210 mm
between them to avoid interference.
Ensure the device is mounted on a level surface.
Mounting and Connecting
1.
Attach the IQT1-F61-IO-V1 read/write head using two screws or the IQT1-FP-IO-V1
using four screws by feeding the screws through the mounting holes in the housing.
Attach the IQT1-18GM-IO-V1 read/write head using suitable mounting materials, e.g.,
nuts or mounting aids.
2.
Connect the device to an IO-Link master that communicates with a higher-level
system.
