Standalone menu options > Status > Usage Reports
Usage reports show the bandwidth usage in MB or GB for all VLANs or individual VLANs.
Choose between Hourly, Daily and Monthly usage reports.
Additional information
Restoration of Factory Defaults
To restore the factory default settings on your Peplink SD-Switch unit, follow the steps below:
1. Locate the reset button on the back panel of the Peplink SD-Switch.
2. With a paperclip, press and keep the reset button pressed.
Note: There is a dual function to the reset button.
Hold for 5-10 seconds for admin password reset (Note: The LED status light blinks in RED 2 times and
release the button, green status light starts blinking)
Hold for approximately 20 seconds for factory reset (Note: The LED status light blinks in RED 3 times and
release the button, all LAN port lights start blinking)
After the Peplink SD-Switch finishes rebooting, the factory default settings will be restored.
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
