Authentication Method**
Select authentication method**
RSTP
enable or disable Rapid Spanning Tree Protocol
DHCP snooping
Default, Trusted or untrusted
Effective only when DHCP snooping is enabled
Mirror Port
Enable port mirroring, select what traffic gets
copied to the configured Port Mirroring port;
INgress, Egress or both.
*
Frame Type setting determines whether the frame should be accepted or discarded.
This option is only configurable when Port Type is set to “Trunk” and “VLan Networks” is set to “All”.
Available options are:
VLAN Only :
Only accept frame types from VLANs( Tagged)
All:
accept both tagged and untagged frames; when any untagged frames or frames tagged as this VLAN
enter into those trunk ports, they will be assigned to this VLAN. Any frames on this VLAN leaving from
those trunk ports will be untagged
After making changes, click “
Save
” and then click the “
Apply Changes
” button on the top-right corner of
the interface.
** Authentication Method is only visible after configuring Port-based 802.1X Authentication.
Available options are:
Forced Authorized
- The port is forced to be in authorized state and network access is permitted.
Forced Unauthorized
- The port is forced to be in unauthorized and network access is prohibited.
Port-based 802.1X
- The port performs 802.1X authentication against a RADIUS authentication server.
The port is in authorized state with successful authentication. Otherwise, it is in unauthorized state.
For aggregated ports, force authorized is used.
RSTP will be disabled when force unauthorized or port-based 802.1X is selected.
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
