Standalone menu options > IP Multicast > IGMP Snooping
IGMP snooping allows us to constrain our multicast traffic by listening to IGMP traffic between the router
and hosts. The switch maintains a map of which links need which IP multicast streams. Multicasts may be
filtered from the links which do not need them and thus controls which ports receive specific multicast
traffic.
To enable IGMP snooping tick the enable checkbox.
IGMP snooping is on a per-LAN basis, add new entries to the IGMP snooping table to activate IGMP
snooping on a particular LAN.
Configure an IGMP snooping querier to send membership queries.
When an IGMP snooping querier is enabled, it sends out periodic IGMP queries that trigger IGMP report
messages from hosts that want to receive IP multicast traffic.
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
