To add a community for either SNMPv1 or SNMPv2, click the Add SNMP Community
button in the Community Name table, upon which the following screen is displayed:
SNMP Community Settings
Community Name
This setting specifies the SNMP community name.
Allowed Source Subnet Address
This setting specifies a subnet from which access
to the SNMP server is allowed. Enter
subnet address here (e.g., 192.168.1.0) and
select the appropriate subnet mask
To define a username for SNMPv3, click Add SNMP User in the SNMPv3 User Name
table, upon which the following screen is displayed:
SNMPv3 User Settings
User Name
This setting specifies a user name to be used in
SNMPv3.
Authentication Protocol
This setting specifies via a drop-down menu one
of the following valid authentication
Protocols:
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
