Pentax Optio S5n, Руководство по эксплуатации

Страница: 159 / 172

157
8
Appendix
Very occasionally, static electricity may cause malfunction of the camera. In
this case, remove the battery and install it again. If the camera works properly,
the camera is in its normal condition and you can continue to use it.
Subject is not in
focus Subject difficult to focus
on Subjects difficult to focus on using autofocus:
objects with little contrast (blue sky, white
walls, etc.), dark objects, finely patterned
objects, fast-moving objects, scenery through
window or net, etc. Lock focus on another
object located at same distance (press shutter
release button halfway), then aim at target and
press shutter release button fully, or use
Manual Focus mode.
Subject is not in focusing
area Position subject in focus frame (focusing area)
in middle of LCD monitor. If the subject is
outside the focusing area, aim the camera at
the subject and lock the focus (press shutter
release button halfway), then compose picture
and press the shutter release button fully.
Subject is too close Set focus mode on
q
(Macro) or
r
(Super
Macro). (p.71)
Focus mode is set on
q
(Macro) or
r
(Super
Macro)
Normal pictures will be out of focus if taken
with focus mode set on
q
(Macro) or
r
(Super Macro).
Flash does not
discharge Flash mode is set to Off Set to Auto or b . (p.74)
The Capture mode is set to
C
, Continuous Shooting,
Infinity-Landscape or
(Sports mode) mode
Flash will not discharge in these modes. You
can cancel the non-flash setting for
(Sports mode).
Problem Cause Remedy
e_kb386.book Page 157 Monday, February 28, 2005 2:39 PM