20.4
Deleting all entries from the phone book
(DELETE ALL)
20.5 Phone book status (PB STATUS)
21.1 Deleting a handset from the base (TERMINATE
HS)
21.2 Dialling mode (DIAL MODE)
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Press the
key.
Press the
key. E.g. "11/50" is displayed, that means there are 11
out of 50 possible entries in the phone book.
This function allows you to delete a handset registration from the base.
Press the
key.
Press the
key. The LCD shows "PIN?".
Enter the current PIN code (the default PIN code is "0000").
Press the
key.
Use
or
key to select a handset.
Press the
key to confirm.
21. Base settings (BS SETTING)
Press the
key.
Use
and
key to select PHONE BOOK.
Press the
key. "ADD ENTRY" appears.
Use
and
key to select DELETE ALL.
Press the
key. The LCD shows "CONFIRM?".
Press the
key to confirm. The handset generates a confirmation
beep.
The PB status shows the number of phone book entries already stored.
Use
and
key to select PHONE BOOK.
Press the
key. "ADD ENTRY" appears.
Use
and
key to select PB STATUS.
Use
and
key to select BS SETTING.
Press the
key. "TERMINATE HS" appears.
If you select the current handset or a
nonexistent handset, a warning tone will be heard.
After a few seconds, the selected handset will not be registered any
more, and the LCD shows "NOT REGISTERED".
This setting is only necessary if required by your telephone system. See user
manual of the telephone system.
You can select to change the dialling mode by the following steps:
Press the
key.
Press
or
key to choose BS SETTING.
Press the
key.
Press
or
key to choose DIAL MODE, then press the
key.
The LCD shows the actual setting.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Use
and
key to select the desired dialling mode (TONE or
PULSE).
Press the
key.
If you are not sure which dialling mode to select, please contact your local
service provider.
Factory default: TONE
Factory default: SHORT
It is important that you memorize your new PIN. If you loose your PIN, you
cannot make any modifications to the device which require a PIN.
Note:
Note:
21.3 FLASH TIME
21.4 Modifying the PIN (MODIFY PIN)
21.5 Resetting the base (BS DEFAULT)
A confirm beep will be heard.
This setting is only necessary if required by your telephone system. See the
user manual of the telephone system.
You can change the Flash time with the following steps:
Press the
key.
Press
or
key to choose BS SETTING,
Press the
key.
Use
or
key to choose FLASH TIME.
Press the
key. The LCD shows the current setting.
Use
or
key to select SHORT/LONG.
Press the
key.
This function allows you to change the PIN number of the currently active
base. The default PIN is 0000.
Press the
key.
Press
or
key to choose BS SETTING,
Press the
key.
Use
or
key to select MODIFY PIN 4.
Press the
key. The LCD shows "PIN?".
Enter the current PIN.
Press the
key. The LCD shows "NEW PIN".
Enter a 4-digit new PIN.
Press the
key. You will be requested to confirm the PIN code.
Enter the new PIN again then press the
key to confirm. Now your
new PIN is activated.
This function allows you to reset the base setting to the factory default.
Press the
key.
Press
or
key to choose BS SETTING, then press the
key.
Press
or
key to choose BS DEFAULT.
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
GB - 49
