GB - 45
Delete/mute [42]
Navigation keys/further functions [43]
up/CID book [65]
down/phonebook [66]
INT [67]
Redial [68]
Star [48]
Hash key [45]
umbers 0-9 / letters from A-Z / symbols
to return to the previous menu; to mute the microphone during
a call; to delete an incorrect input
to scroll up through lists and menu options; to
increase the earpiece/speaker volume during a call;
to open the CID book
to scroll down through lists and menu options; to
reduce the earpiece/speaker volume during a call; to
open the phonebook
to set up an internal call to another handset; to
transfer an incoming call to another handset; to s
to activate the door release
n
key assignment:
0-9
et up
a conference call with an external line and an internal
handset
to enter the redial book; to insert a pause when pre-
dialing a number
to turn on/off the keypad lock function; to set up a conference
call
16.2 Icons on the LCD display (see fig. B)
17.1 Making a call
17.2 Receiving a call
indicates that you have missed one or more calls
indicates that the line is engaged
indicates that the hands-free function is enabled
indicates the battery charge level (three black bars =
batteries are fully charged, one black bar = very low
battery power)
Pick up the handset and press the
key. The
icon appears on
the LCD, the handset is not in standby mode any more.
Dial a telephone number (max. 32 digits).
To end the call, either press the
key or replace the handset in the
base.
You can also enter the desired phone number in standby mode which allows
you to make corrections before dialling. Follow these steps:
Pick up the handset.
Enter a telephone number (up to 32 digits). If required, press the
key to insert a pause. “P” appears on the LCD.
Check the telephone number. If you made a mistake while entering the
number, you can use the
key to clear the last digit.
he handset
will dial the number.
To end the call, either press the
key or replace the handset in the
base.
New call
Picked up receiver
Hands-free
Battery icon
Signal icon
Keypad lock
17. Basic functions
!
!
!
!
!
!
!
!
indicates the radio communication with the base; if the
handset is too far from the base, the icon will blink
appears when the keypad is locked
All descriptions in this manual assume that the handset is in standby mode.
Set the telephone to standby mode by pressing the
key.
When a new call is received, the call information will appear on the LCD and
the telephone rings.
When the number appears correctly, press the
key, and t
C/
Key
Characters in the displayed order
0
(spc)
&
/
.
1
-
1
@
_
2
A
B
C
2
3
D
E
F
3
4
G
H
I
4
5
J
K
L
5
6
M
N
O
6
7
P
Q
R
S
7
8
T
U
V
8
9
W
X
Y
Z
9
C/
