manualshive.com logo in svg
background image

SLIMLITE Pool Light Installation and User’s Guide

SLIMLITE Pool Light Installation and User’s Guide

 

   

   3

 

              Most states and local codes regulate the construction, installation,  

 

 

and operation of public pools and spas, and the construction of 

residential pools and spas.  It is important to comply with these codes, many of which 

directly regulate the installation and use of this product. Consult your local building and 

health codes for more information.

SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS LIGHT 

IS NOT INSTALLED AND USED CORRECTLY.
INSTALLERS, POOL OPERATORS AND POOL OWNERS MUST 

READ THESE WARNINGS AND ALL INSTRUCTIONS BEFORE  

USING THE POOL LIGHT. 

 

 

Before installing this product, read and follow all warning notices  

 

 

and instructions in this Guide. Failure to follow warnings and 

instructions can result in severe injury, death, or property damage.  

Call (800) 831-7133 for additional free copies of these instructions. Please refer to 

www.pentair.com for more information related to this products.

IMPORTANT NOTICE 

- Attention Installer: 

This Installation and User’s 

Guide (“Guide”) contains important information about the installation, operation 

and safe use of this underwater pool light. This Guide should be given to the 

owner and/or operator of this equipment. 

IMPORTANT WARNING AND SAFETY INSTRUCTIONS

BEFORE WORKING ON POOL LIGHTS always disconnect power 

to the pool lights at the circuit breaker from the light before 

servicing the light. Failure to do so could result in death or 

serious injury to service person,  pool users or others due to 

electric shock.

RISK OF ELECTRICAL SHOCK OR ELECTROCUTION:

This underwater light must be installed by a licensed or certified electrician or a 

qualified pool professional in accordance with the current National Electrical Code 

(NEC), NFPA 70. All applicable local installation codes and ordinances must also be 

adhered to. Improper installation will create an electrical hazard which could result in 

death or serious injury to pool users, installers or others due to electrical shock, and 

may also cause damage to property. Always disconnect the power to the pool light at 

the circuit breaker before servicing the light. Failure to do so could result in death or 

serious injury to serviceman, pool users or others due to electrical shock.  

                        

Important Safety Information for Pentair Niche and Light 

Installation  

• 

All Niche and Light installations must conform with all codes. The SlimLite light 

can only be used with Pentair niches P/N 56503 (3/4” bushing) or P/N 59504 

(1” bushing).  If local codes mandate a cord seal, use Cord Seal Kit (P/N 

670044).

THE SLIMLITE POOL LIGHT REQUIRE HIGH VOLTAGE WHICH 

CAN SHOCK, BURN, OR CAUSE DEATH. 

Содержание SlimLite 56400

















Отзывы: