Pentair PF6-P, Руководство пользователя, Страница: 6 / 16

Your system will not be ready for use for a minimum of 48 hours while the Fluoride Filter Soak process takes place. Please
plan your installation accordingly.
Water will flow out of the downflow inlet side of the Bypass Valve during this process. Be sure you perform this series of
steps in a location suitable for water flow.
FLUORIDE FILTER SOAK
1. Attach a garden hose to the Hose Bib Assembly.
2. Connect the Hose Bib Assembly to the upflow inlet side of the Bypass Valve and hand tighten.
3. Fill the Pentair Whole House Fluoride Filter Tank full until water comes out of downflow inlet side of the Bypass Valve.
4. Turn the water off.
5. Remove the garden hose from the Hose Bib Assembly. Do not remove the fitting.
6. Allow the carbon tank to soak for at least 48 hours prior to tank installation.
Top View
Whole House Fluoride Filter
Garden
Hose
Hose Bib
Assembly
Water
Bypass Valve
OUTLET
INLET
IMPORTANT
Note
6 • FLUORIDE WATER FILTER SYSTEM