Pentair PF6-P, Руководство пользователя, Страница: 10 / 16

BYPASS VALVE OPERATIONS
Figure A shows the system "in service" which
allows water to flow in and out of the tank. In this
position the system would be considered ON.
Figure B shows the system "in bypass" which will
direct water straight to the home without going
in and out of the tank. In this position the system
would be considered OFF.
Figure A
In Service
Figure B
In Bypass
COMPLETE THE INSTALLATION
Figure A
In Service
Figure B
In Bypass
1. Turn on main water supply and check for leaks.
2. Peel off the protective plastic wrap from the stainless steel tank jacket(s).
3. Add the Pentair logo sticker(s) in the desired location on the tank.
4. Wax stainless steel tank jacket(s) with wax provided (or any other non-abrasive auto wax) a minimum of 1-2 times per year or as
needed based on the installed environment.
Avoid high flow rates such as bathtub, utility sinks, hose bibs, multi-headed showers, body sprayers, or anything that is considered
high flow for the first 72 hours to avoid flow restrictions caused by carbon blockage of the top basket inside the fluoride filter.
CAUTION
Carbon dust may be released into the water lines of the house/building during the first few days of water use after fluoride filter
installation. The carbon dust is harmless, but may give the water a gray appearance that should diminish within a week or 10 days
depending on water use.
CAUTION
10 • FLUORIDE WATER FILTER SYSTEM