16
IntelliFlo VS+ SVRS Installation and User’s Guide
Speed 1-8 (Schedule a Time to Run the Pump)
By setting a start time and a stop time, Speeds 1-8 can be programmed to run a certain speed at a certain time
of day. To run a scheduled pump speed, press the Start button (LED on). The LCD screen will display
“Running Schedules” when it is ready to run a scheduled speed. If the start button is pressed during a scheduled
speed time the screen will read Running Speed X and will run speed X. (If priming is enabled it will prime first
at the maximum RPM setting of the pump before running speed X.)
Note: The IntelliFlo pump will not run the scheduled speeds until the Start/Stop button is pressed
(LED on) to place the pump in the “Running Schedule” mode.
To set a schedule to run the pump:
1. Check that the green power LED is on.
2. Press the
Menu
button. “Settings” is displayed.
3. Use the
Up
or
Down
arrow button to scroll to “Speed 1-8”.
4. Press the
Select
button. “Speed 1” is displayed.
5. Use the
Up
or
Down
arrow button to choose the speed you wish to program.
6. Press the
Select
button. Select
Manual
,
Schedule
, or
Egg Timer
for speeds 1-4. “Disabled” or
“Schedule” for speed 5-8
is displayed.
Speeds 1-4
default setting is MANUAL. To create a schedule for speed 1-4 Press Select to
highlight manual.
Speeds 5-8
default setting is DISABLED. To create a schedule for speed 5-8, Press Select to
highlight Disabled.
7. Use the
Up
or
Down
arrow button to scroll to “Schedule”.
8. Press the
Enter
button.
9. Press the
Down
arrow button. Set speed will be displayed.
10. Press the
Select
button to change the speed. The first digit
will highlight (ones digit).
11. Use the
Up
or
Down
arrow button to change the speed.
12. Press the
Enter
button to save the setting.
13. Press the
Down
arrow button. “Set Start Time” is displayed.
14. Press the
Select
button to change the start time.
The cursor will highlight the minute column.
15. Use the
Left
arrow button to move the cursor to the hour column if desired.
16. Press the
Enter
button to save the setting.
17.
Press
Down
arrow. “Set Stop Time” is displayed
18. Press the
Select
button to change the stop time.
19. Press the
Enter
button to save the setting.
20.
Press the Start/Stop button. The LED above the button will light up and the pump will start if within
a scheduled time or “Running Schedule” is displayed.
When the pump is running a scheduled speed or a duration speed (egg timer) the countdown time (T 00:01)
showing the hours and minutes is displayed on the screen.
Note:
Speeds 5-8 can be programmed to operate in Schedule mode only. The IntelliFlo VS can
run eight (8) different speeds at eight (8) programmed start and stop times per day.
Note:
When two speeds are scheduled during the same run time the pump will run the higher RPM
Speed regardless of Speed # in use.
Содержание IntelliFlo VS+ SVRS
