Pentair IntelliCenter 522039Z, Руководство по установке

Страница: 3 / 12

3
IntelliCenter Control System Expansion Card and Pool Cover Installation Guide
IntelliCenter Control System Expansion Card and Pool Cover Installation Guide
(*) Slot 1:
Pool Cover
Expansion
Card
Slot 2:
Expansion
Card Slot 3:
Expansion
Card (available) Slot 4:
Expansion
Card (available)
i5P (Base System)
Main Motherboard
Expansion
Card
3
Expansion
Card
4
Pool Cover Expansion Card
(P/N 522975)
1 2 3 4
ON
C&K SD
A 04
Pool Cover 2
Pool Cover 1
5V Power
Source
Retaining
Screws
Figure 3. (*) Use SLOT 1 for Pool Cover Expansion Card if no Personality Card is
being used, otherwise use SLOT 2, 3, or 4.
7. When the wiring connections to the Pool Cover Expansion card are finished, close the hinged
control panel and secure it with the two retaining screws. Reinstall the High Voltage Panel and
insert the panel’s three tabs into the lower slots on the enclosure. Secure the panel with the two (2)
retaining screws. Close the front door and secure with the latch. See page 2 for illustration.
Access the Outdoor Control Panel in the Load Center or Power Center (Continued)
Wiring to the Pool Cover Expansion Card Digital Inputs
Pool Cover Expansion Card
(P/N 522975)
1 2 3 4
ON C&K SDA 04
DIGITAL INPUTS ANALOG INPUTS
Not Used
Pool Cover 2
Pool Cover 1
Not Used
Not Used
5VDC Power
Source
Figure 3. IntelliCenter™ Pool Cover Expansion Card Digital Inputs
6. For pool cover wiring instructions to the digital inputs, please refer to “Connecting the Rotary
Encoder to the IntelliCenter Control System Pool Cover Expansion Card” on the next page.