background image

1

                   

AQUALUMIN

®

 III Nicheless Pool Light Installation Guide

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

  IMPORTANT NOTICE

This AquaLumin III Nicheless Pool Light will install only with the following AquaLumin III Nichless Pool
Light Mounting Brackets, manufactured after JUNE 6, 1994:

Vinyl Mounting Bracket Assembly 1"     (P/N 78887800 - For more information see page 2)
Vinyl Mounting Bracket Assembly 3/4"  (P/N 78887700 - For more information see page 2)

Section                                                 Contents
1.

Installing a mounting bracket and light fixture during new vinyl pool construction...........3

2.

Replacing light fixture in existing pools......................................................................7

3.

Replacing a lamp only..............................................................................................10
Parts List / Replacement Part Kits........................................................................13-15

                                              Minimum Qualifications

       

 Licensed or Certified Electrician

       

 Electrician or qualified pool person

       

 Qualified pool service person

Housing

Housing

Mounting

Mounting

BACK VIEW

AquaLumin III Nichless Pool Light - Manufactured after June 6, 1994

WARNING! DO NOT install the AquaLumin III Nichless Pool Light in ocean salt water pools,
spas and hot tubs. The AquaLumin III Nichless Pool Light is designed for use in fresh water
pools, spas and hot tubs (including those using salt chlorine generators).

WARNING! THE LIGHT LENS MAY GET HOT WHEN IN USE. USERS SHOULD AVOID
CONTACT WITH THE LIGHT AS SERIOUS BURNS MAY RESULT FROM PROLONGED
CONTACT WITH THE LIGHT.

AQUALUMIN

®

 III NICHELESS POOL LIGHT

INSTALLATION GUIDE

Содержание AQUALUMIN III

















Отзывы: