AMERBRITE
™
White LED Pool Lamp Installation and User’s Guide
3
Be sure to use the special pilot screw provided with the Amerlite
®
Incandescent
Light. This screw mounts and electrically grounds the housing securely to the
mounting ring and wet niche. Failure to use the screw provided could create an
electrical hazard which could result in death or serious injury to pool users,
installers or others due to electrical shock.
Always install a new lens gasket (part number 79101601) whenever
disassembling the Amerlite incandescent light fixture assembly. Failure to do so
may permit water to leak into the assembly which could cause; (a) an electrical
hazard resulting in death or serious injury to pool users, installers or others due
to electrical shock; or; (b) breakage of the lamp or lens, which could result in
serious injury to pool users, installers, bystanders, or property damage.
AMERBRITE
™
WHITE LAMP INSTALLATION INSTRUCTIONS
BEFORE WORKING ON the AmerBrite white lamp
always
disconnect power to the pool and/or spa lights at the source
circuit breaker from the light before servicing the light. Failure
to do so could result in death or serious injury to service
person, pool users or others due to electric shock. When
installing and using this electrical equipment, basic safety
precautions should always be followed, include the following:
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION:
THE AMERBRITE
™
WHITE LAMP MAY REQUIRE HIGH VOLTAGE
WHICH CAN SHOCK, BURN, OR CAUSE DEATH.
PILOT SCREW
(12 O’clock)
