MicroBrite color led light for pool and spa Installation and User’s Guide
English
8
6. Insert the MicroBrite light into the 1.5” wall fitting. By hand start the process of threading the male threads
on the MicroBrite’s white threaded adaptor ring into the female threads of the wall fitting.
7. Place Microbrite light installation tool (P/N
602158Z) over the front of the light while turning
the tool and light clockwise.
Note: If the light does
not turn smoothly, pull the light slightly out and be
sure that it’s seated properly and the wall fitting is
free of debris, then reinstall the light.
8. Turn the light clockwise while threading it into the
wall fitting to un-twist the power cord.
9. Turn the light clockwise (approximately 5 turns)
so that it is threaded tightly into the wall fitting.
10.
Note: Once the light is tightly installed remove the
tool be sure the light cannot be unscrewed using
your fingers. The light should be secured in place
so that it can only be removed by using the light
installation tool.
LIGHT INSTALLATION
Insert adaptor male thread
adaptor ring into female
thread of wall fitting. By hand
then turn light clockwise.
Cord will un-twist
as light is turned
clockwise into fitting
Installation tool
1.5" Standard wall fitting
Light cable to junction box