Pentair 3200NXT, Руководство по обслуживанию

Страница: 23 / 36

Page 23
Diagnostic Programming Guide
Hours Between Last Two Regenerations
The hours between the last two regenerations will be saved and displayed.
Depress the Extra Cycle button. 1.
Hours Since Last Regeneration
The hours since the last regeneration will be saved and displayed.
Depress the Extra Cycle button. 1.
Volume Remaining (This Tank Only)
Volume remaining in the current tank will be adjustable when displayed in this mode. Regeneration will occur if
set to zero.
NOTE: Volume Remaining will not display for System Type 6.
The maximum ranges are the same as the maximum volume calculated on the main screen.
Press the Shift button to select the digit you want to modify. 1.
Use Up or Down buttons is used to adjust this value. 2.
Depress the Extra Cycle button 3.
Volume Remaining (System)
Volume remaining in the system cannot be edited when displayed in this mode, except for the Lead unit. It can
only be viewed on the Lag unit.
Depress the Extra Cycle button 1.