background image

CLEAN AND CLEAR

®

 PLUS Cartridge Filter Installation and User’s Guide

Consumer Information and Safety 

This filter is designed and manufactured to provide many years of safe and reliable service when installed, operated and 
maintained according to the information in this manual and the installation codes referred to in later sections. Throughout 
the manual, safety warnings and cautions are identified by the “      “ symbol. Be sure to read and comply with all of the 
warnings and cautions.

Before installing this product, read and follow all warning notices and instructions which are included. 
Failure to follow safety warnings and instructions can result in severe injury, death, or property 
damage.  Call (800) 831-7133 for additional free copies of these instructions or replacement safety 
labels.

 

Due to the potential risk that can be involved it is recommended that the pressure test be kept to 
the minimum time required by the local code. Do not allow people to work around the system when 
the circulation system is under pressure test. Post appropriate warning signs and establish a barrier 
around the pressurized equipment. If the equipment is located in an equipment room, lock the door 
and post a warning sign.

 

Never attempt to adjust any closures or lids or attempt to remove or tighten bolts when the system is 
pressurized. These actions can cause the filter to separate and could cause severe personal injury or 
death if they were to strike a person.

IMPORTANT WARNING AND SAFETY INSTRUCTIONS

IMPORTANT NOTICE:

 

This guide provides installation and operation instructions for the Clean and Clear

®

 Plus Cartridge Filter. Consult 

Pentair Water Pool and Spa, Inc. with any questions regarding this equipment.

Attention Installer: 

This guide contains important information about the installation, operation and safe usage of this 

product. This information should be given to the owner and/or operator of this equipment after installation.

Attention User: 

This manual contains important information that will help you in operating and maintaining this filter. Please 

retain it for future reference.

This is the safety alert symbol. When you see this symbol on your system or in this manual, look for 
one of the following signal words and be alert to the potential for personal injury.

Warns about hazards that can cause death, serious personal injury, or major property damage if ignored.

Warns about hazards that may cause death, serious personal injury, or major property damage if ignored.

Warns about hazards that may or can cause minor personal injury or property damage 
if ignored.

NOTE

   

 

 Indicates special instructions not related to hazards.

Carefully read and follow all safety instructions in this manual and on equipment. Keep safety labels in good condition; replace 
if missing or damaged.

ii

Содержание 160301

















Отзывы: