Pentair Pool Products Nocchi Pressomat, Руководство по эксплуатации и обслуживанию

Страница: 11 / 27

25
YES means that the unit may send and receive data through a serial port
CURRENTLY NOT AVAILABLE
- Line n. 2 no message
At the end of the configuration and of the insertion of the operational parameters, the unit remains predisposed for
manual operation. By pressing key (11) for a few seconds, the red automatically switches off (5) (LED
with manual operation) and the green led is lit (6) (LED with automatic operation)
After selecting the parameter press key (18) the following message will be displayed:
M
A
MAN
AUT
ENTER
NOCCHI PUMPS
BAR 5.3
The unit is working in Automatic operation and if the unit is equipped with electronic transducer, the network pressure
level is displayed on the 2
nd line.
2) UNITS WITH PRESSURE TRANSDUCER
NOCCHI PUMPS
BAR 5.3
The following message will be displayed:
In this case both the green led (2) and the red led (5) are lit
BEFORE THE BUZZER EMITS THE 8
th
(EIGHTH) RING
Press key (11) for a few seconds
The following message will be displayed:
M
A
MANUAL FUNCTION
BAR 5.3
The buzzer automatically sounds off and the red led (5) remains turned on.
By pressing key (18) for 10 seconds, the following message will be displayed:
ENTER
REVERSAL OF POSITION
WITH SENSOR NO
- Line n. 1 REVERSAL OF POSITION
With keys (16) or (17) it is possible to set YES or NO.
YES means that at the end of every operational cycle the pump which was initialised first will be changed
NO means that the reversal of the pumps position will remain locked
After choosing the parameter press key (18)
- Line n. 2 WITH SENSOR
With keys (16) or (17) it is possible to set YES or NO.
YES means that the unit is equipped with electronic pressure sensor
NO means that the unit works with differential pressure switch
+ -
ENTER
+ -
LINEA MAN
MAN
GB