Pentair Pool Products Kreepy kadet, Руководство пользователя

Страница: 3 / 15

Step 2. Attach The Skirt
Kreepy Kadet’s skirt is held in place with straps. Position
the cleaner so it is standing up with the tubes at 45 degrees
with the swivel head pointing away from you. See Figure 3.
Position the skirt so the straps wrap into the grooves on the
sides of the main body and away from you. Pull the left tee
shaped end of the strap so it slides into the last slot on the
back of the main body. Repeat these steps for the right strap.
IMPORTANT: The left strap must be fitted first for the
proper fit of the skirt.
Step 3. Attach The Guide Wheel
Slide the guide wheel over the top of the swivel head and
down over the guide wheel holder located at the top of
the main body. Snap the guide wheel over the ridge on the
guide wheel holder. See Figure 4. Ensure that the flat side
of the guide wheel center hub is facing up. Once in place,
the ring should spin freely.
Step 4. Attach The Bumper Strap
I n s e rt the bottom end of the bumper strap (end closest to the
bumper weight) into the slot provided on the main body.
I n s e rt the top end of the bumper into the slot provided in the
swivel head. See Figure 5.
Swivel Head
Swivel Head
Guide Wheel
Guide Wheel
Holder
Seal
Main Body
Skirt
Main Body
Groove for
Skirt Strap
DriveTubes
Strap Tee
End
Slot for
Skirt Strap
Skirt
Detail
Swivel Head
Main Body
Bumper
Weight
Figure 3
Figure 4 Figure 5