Pentair Pool Products E-Z Vac, Инструкция по установке и эксплуатации

Страница: 3 / 15

3
I. Pool Requirements
• E-Z Vac is recommended for use in pools that have a cove* height of at least 6 inches. Pool coves
less than 6 inches may inhibit the cleaner’s operation.
*The pool “cove” is the embankment between the pool wall and floor. It is generally constructed
with either a banked or radius shape as shown in Figure 1.
• E-Z Vac
is not recommended
for use in pools with no cove (with a 90° floor-to-wall angle). The
absence of a cove may affect the cleaner’s operation by inhibiting its random-pattern coverage.
II. Preparation Of Your Pool
Before assembling and installing your E-Z Vac, your pool should be clean and algae-free so as not
to inhibit the cleaner’s traction. If necessary, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
III. Assembly
Remove E-Z Vac and all of its parts from the box and check to make sure that all components were
included. Refer to Figure 2.
Components Check List
1 1. E-Z Vac
1 2. Weighted Bumper Strap
1 3. Automatic Regulator Valve
1 4. Valve Cone
1 5. Eyeball Diverter & Outer Ring
1 6. Hose Weight
1 7. Aboveground Seal
1 8. Hose Protector
9. Hose - 32 ft. total length
(not shown)
3.
4.
5.
6.
7.
Figure 2
Figure 1
2.
1.
Serial Number
8.