7
IntelliFlo
®
Pump Demo Kiosk Operation and Set-Up Instructions
IntelliFlo
®
Pump Demo Kiosk Operation and Set-Up Instructions
120V/240V A/C Step-Up Transformer
The kiosk transformer should be the only equipment connected to the outside of the kiosk. It should connect to a 20
amp circuit.
1. Be sure the voltage “tap-plug” selector to the 110V on the back of the transformer voltage is in the 110V position.
2. The external power cord may be routed through the 2” diameter opening located in the back wall of the cabinet.
3. The transformer “Power On” switch should be facing the front of the cabinet. Plug A/C power strip into the left-
hand side 110V socket of the Step-Up Transformer.
4. Plug the 12 gauge power cord into the 220V socket Plug the other end into the DAQ-202 “black box”; at the “line
in” socket (be sure the on/off switch on the DAQ-202 is in the OFF position).
Voltage Input
Selector must
be in 110V
Transformer
“Black Box”
A/C outlet plugs
into the 110V
side of the
transformer
