8
IntelliFlo
®
Pump Demo Kiosk Operation and Set-Up Instructions
Connect to Laptop Computer and DAQ-202 “Black Box” Unit
(The Pentair Pump Demonstration Software and companion Cost Comparison Calculator is an installed application
available via the Windows Desktop Icon)
1. Install the A/C power cord w/ adapter into the computer. Connect the monitor video cable. Then plug the USB into
the laptop.
2. Route the A/C Power adapter cord through the opening at the back of the top shelf and plug into the A/C power strip.
3. Plug the USB into the laptop and the black box unit.
4. Place the computer into the cabinet on the upper right shelf. Do not turn on the computer. Follow the start up
sequence on page 16.
Setting up the Wireless Mouse
1. Be sure to plug in USB adapter for wireless mouse. The adapter may be located inside the mouse for shipping.
2. The ON/OFF switch is located on the bottom of the mouse.
LCD Monitor
1. Connect the monitor power cord and video cable, as shown in the picture below.
2. Use the (2) supplied Velcro straps to route the wires along the monitor stand and down into the top of the
cabinet.
3. Route the power cord and video cable down through the hole in the pump board, and plug into laptop computer.
4. Route the monitor A/C power cord through the opening in the back of the computer shelf, and plug into the A/C
power strip at the bottom of the cabinet.
Plug USB to laptop
USB to Black Box
