Pentair Jung Pumpen 1225/2 BW, Инструкция по эксплуатации

Страница: 12 / 28

Parameter Factory default setting Client setting
Level detection
Level detection Compli
base load ON depending on analogue level detection
Base load OFF depending on analogue level detection
peak load ON depending on analogue level detection
Peak load OFF depending on analogue level detection
High water depending on analogue level detection
Upper edge of pump depending on analogue level detection
Time control
Max. running time Deactivated
S2 Short-time operation 10 Min
S3 Intermittent duty 10%
Follow-up time Standard / 6 s
Start-up delay 0 s
Forced switching on
Test run OFF
Auto. Pumping out 000 h
Alarm
Acoustic alarm ON
Alarm relay flashes OFF
Delay alarm 0 s
AUX logic NO contact
AUX influence None
Direction of rotation check Activated
Buzzer reactivation 4 hours
Overcurrent limit
P1 Current limit 0 = deactivated
P2 Current limit 0 = deactivated
Maintenance
Days 365 days
Last maintenance 01/01/2016
Further settings
P2 Peak load ON
ATEX mode OFF
Compensate for operating hours NO
Lock setting Key lock OFF
Change the password 3197 <User must first confirm old password>
Light settings Auto OFF
Maintenance service 01805 188881
12
ENGLISH